manualshive.com logo in svg

Christie Roadster HD14K-J, Руководство пользователя, Страница: 9 / 182

Поделиться
Скачать
Christie Roadster HD14K-J Скачать руководство пользователя страница 9

J Series 2.0, 2.4, and 3.0kW User Manual

1-1

020-100707-01 Rev. 1  (10-2011)

1 Introduction

Every effort has been made to ensure the information in this document is accurate and reliable; however,
due to constant research the information in this document is subject to change without notice.

USERS/OPERATORS: 

This manual is intended for trained users operating professional high-brightness

projection systems. Such users may also be trained to replace the lamp and air filter, but cannot install the
projector or perform any service functions on the J Series projector.

SERVICE: 

Only Christie accredited technicians knowledgeable about all potential hazards associated

with high voltage, ultraviolet exposure and high temperatures generated by the lamp and associated
circuits are authorized to 

1)

 assemble/install the projector and 

2)

 perform service functions inside the

projector.

This manual contains the following sections:

• Section 1 Introduction
• Section 2 Installation and Setup
• Section 3 Operation
• Section 4 Web User Interface
• Section 5 Maintenance
• Section 6 Troubleshooting
• Section 7 Specifications
• Appendix A: Menu Tree
• Appendix B: GPIO
• Appendix C: DMX / ArtNet

1.1

Labels and Marking

Observe and follow any warnings and instructions marked on the projector.

  Indicates a hazardous situation which, if not avoided, will result in death or serious

injury. This signal word is to be limited to the most extreme situations.

  Indicates a hazardous situation which, if not avoided, could result in death or serious

injury.

  Indicates a hazardous situation which, if not avoided, could result in minor or moderate

injury. It may also be used without the safety alert symbol as an alternative to
“NOTICE”.

Содержание Roadster HD14K-J























































































































































































Отзывы:

Нет отзывов