Christie Roadster HD14K-J, Руководство пользователя, Страница: 126 / 182

4-12 J Series 2.0, 2.4, and 3.0kW User Manual
020-100707-01 Rev. 1 10-2011
Section 4: Web User Interface
To Add a GPIO Event
1. Click Add to open the RTE Wizard .
2. Select the GPIO Event tab.
3. For the
GPIO Event option define the Input
Condition field as required. The Input
Condition field contains 7 blocks which refer to
the 7 I/O pins on the GPIO connector. Pin 1 =
+12V and Pin 5 = Ground are not included or
changed.
2)
Clicking a block toggles between H,
L, and X as shown in Figure 4-19 GPIO Event .
See Appendix B: for detailed information.
To Add a Function Key Event
1. Click Add to open the RTE Wizard .
2. Select the Function Key Event tab.
3. Select a
Function key from the drop-down list as
shown in Figure 4-20 Function Key Event . Refer
to Section 3: Operation for detailed information.
To Add a DMX Channel Event
1. Click Add to open the RTE Wizard .
2. Select the DMX Channel Event tab.
3. Select a
DMX channel (DMX-56 to DMX-61)
from the drop-down list as shown in Figure.
Refer to
Section 3: Operation for detailed
information.
F
IGURE
4-19 GPIO E
VENT
F
IGURE
4-20 F
UNCTION
K
EY
E
VENT
F
IGURE
4-21 DMX C
HANNEL
E
VENT