manualshive.com logo in svg

Christie Roadster HD14K-J, Руководство пользователя, Страница: 15 / 182

Поделиться
Скачать
Christie Roadster HD14K-J Скачать руководство пользователя страница 15

J Series 2.0, 2.4, and 3.0kW User Manual

2-1

020-100707-01  Rev. 1   (10-2011)

2 Installation and Setup

This section explains how to install, connect and optimize the projector for delivery of superior image
quality. Illustrations are graphical representations only and are provided to enhance the understanding of
the written material. 

2.1

Projector Quick Setup and Installation

The following instructions are for those preferring a quick setup. Refer to the remaining subsections for 
detailed setup instructions.

 

  Always power down the projector and disconnect all power sources before servicing or

cleaning.

  Refer to Safety Warnings and Guidelines in 

Section 5 Maintenance

.

STEP 1 - Installing a Projection Lens

The projection lens, shipped separately from the projector, must be installed prior to setting up the projector. 

 Remove the lens plug from the lens opening in the projector before installing the lens.

Retain the lens plug for projector transportation to protect the optical components
from dust and debris.

IMPORTANT! 

The lens seals the projector, preventing contaminants from entering the interior of the 

projector. Never operate a projector without a lens.

LENS INSTALLATION

IMPORTANT! 

Remove the rear lens cap from the lens. Keep the front lens cap on the lens to protect it 

during installation.

1. Rotate the lens clamp clockwise to the OPEN position, see 

Figure 2-1

.

F

IGURE 

2-1 

Содержание Roadster HD14K-J























































































































































































Отзывы:

Нет отзывов