manualshive.com logo in svg

Christie Roadster HD14K-J, Руководство пользователя, Страница: 106 / 182

Поделиться
Скачать
Christie Roadster HD14K-J Скачать руководство пользователя страница 106

3-50

J Series 2.0, 2.4, and 3.0kW User Manual

020-100707-01  Rev. 1   (10-2011)

Section 3: Operation

• INPUT LEVEL DETECTOR

The 

Input Level Detector

 check box enables specific thresholds for blacks and whites. Input levels that fall 

below a specified level value (see below) are displayed as black, and all others are displayed as white. To use:
1. Enable 

Input Level Detector

 and display a continuous greyscale.

2. Set 

Level Detector Threshold

 

to near black (such as 200).

3. Adjust Offsets to minimize area of black stripe.
4. Set 

Level Detector Threshold

 

to near white (such as 800).

5. Adjust Gains to minimize area of white stripe.

• LEVEL DETECTOR THRESHOLD
Input Level Value

 defines the value to be used by the 

Input Level Detector

 

in recognizing blacks and whites. 

See 

Input Level Detector

, above.

• ASPECT RATIO OVERLAY

Check this box to display an overlay pattern over the image. The overlay shows the boxes corresponding to the 
size and shape of different aspect ratios.

• TEST PATTERN COLOR SWAP

This function swaps the green and red color when drawing the Grid test pattern, and may be helpful when 
adjusting convergence on the projector.
•

CALIBRATE LITELOC

 

The LiteLoc calibration process must be run to calibrate the LiteLoc sensor on all model types. “Constant 
Intensity” mode cannot operate correctly if the calibration has not been performed. 

NOTE:

 

The shutter will 

close for the duration of the calibration, and will automatically open again when the calibration is complete.

3.8.10

 

SERVICE- Submenu

Access restricted to Christie accredited service technicians.

3.8.11 OPTION CARD SETTINGS - Submenu

Allows adjustment of any settings specific to each option card that is currently installed in the projector.  Refer 
to Configuration - Option Card Settings 

Appendix A: Menu Tree

.

Содержание Roadster HD14K-J























































































































































































Отзывы:

Нет отзывов