Christie Roadster HD14K-J Скачать руководство пользователя страница 132

Страница: 132 / 182

5-4

J Series 2.0, 2.4, and 3.0kW User Manual

020-100707-01 Rev. 1 (10-2011)

Section 5: Maintenance

5. REMOVE THE LAMP MODULE
Make sure the lamp insertion/removal handle hook is located behind the lamp module (

Figure 5-3

) and pull

lamp module off of electrical terminal by pulling on the insertion/removal handle. Carefully pull on the lamp
module handle to remove the lamp. If the lamp is to be discarded, follow safe disposal/recycling procedures.

IGURE

5-3

6. RECORD THE SERIAL NUMBER OF THE NEW LAMP
In the lamp menu, select

CHANGE LAMP

. This will prompt for the old lamp serial number (if it was not

previously entered). Enter the new lamp serial number.

NOTE:

This action is not mandatory, it is recommended

for accurate lamp statistics to be archived.

7. INSERT THE NEW LAMP MODULE
Align the base plate of the new lamp module under both side alignment guides (

Figure 5-4

) then slide the

module into the projector in the same orientation you removed the old lamp module until the resistance
increases.

NOTE:

A slightly harder push may be required to ensure it is fully seated. Lamp alignment marks are

provided to indicate the fully seated position.

IGURE

5-4

Содержание Roadster HD14K-J























































































































































































Результаты поиска

Содержание Roadster HD14K-J

Отзывы:

Christie Roadster HD14K-J, Руководство пользователя, Страница: 132 / 182

Результаты поиска

Содержание Roadster HD14K-J

Отзывы: