manualshive.com logo in svg

Christie Roadster HD14K-J, Руководство пользователя, Страница: 160 / 182

Поделиться
Скачать
Christie Roadster HD14K-J Скачать руководство пользователя страница 160

7-12

J Series 2.0, 2.4, and 3.0kW User Manual

020-100707-01  Rev. 1   (10-2011)

Section 7: Specifications

7.11.2 Electro-Magnetic Compatibility

Emissions

• FCC CFR47, Part 15, Subpart B, Class A - Unintentional Radiators
• CISPR 22: 2008-09/EN55022: 2006 + A1:2007 Class A - Information Technology Equipment

Immunity

• CISPR 24: 1997 +A1:2001+A2:2002/ EN55024: 1998 +A1:2001 +A2:2003 EMC Requirements - Infor-

mation Technology Equipment

7.11.3 Environmental

The product must conform to:
• EU Directive (2002/95/EC) on the restriction of the use of certain hazardous substances (RoHS) in electrical 

and electronic equipment and the applicable official amendment(s).

• EU Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 

(REACH) and the applicable official amendments.

• EU Directive (2002/96/EC) on waste and electrical and electronic equipment (WEEE) and the applicable 

official amendment(s).

• China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution caused by elec-

tronic information products, the hazardous substances concentration limits (SJ/T11363-2006), and the appli-
cable product marking requirement (SJ/T11364-2006). 

7.11.4 Marking

This product shall conform to all relevant Canadian, US, and European directives, standards, safety, health and 
environmental concerns and bears the following markings at product launch:
• UL
• CE
• RoHS
• WEEE
• Future International Certifications to include: CCC, KC, PSE, c-tick, Gost-R, South Africa
• International packaging recycling mark requirements:
• EU Directive (94/62/EC) on packaging and packaging waste;
• China packaging recycling mark standard (GB18455-2001);
• Korea extended producer responsibility (EPR) separate discharge mark system under the act on the promo-

tion of resource saving and recycling (2003);

• United States society of the plastics industry (SPI) resin identification code (1988);
• ISO standards on marking of plastics (11469:2000, 1043-1:2001, 1043-2:2000, 1043-3:1996, and 1043-

4:1998). 

Содержание Roadster HD14K-J























































































































































































Отзывы:

Нет отзывов