manualshive.com logo in svg

Christie Roadster HD14K-J, Руководство пользователя, Страница: 14 / 182

Поделиться
Скачать
Christie Roadster HD14K-J Скачать руководство пользователя страница 14

1-6

J Series 2.0, 2.4, and 3.0kW User Manual

020-100707-01 Rev. 1   (10-2011)

Section 1: Introduction

1.4.2 AC /Power Precautions

  Use only the AC power cord supplied. Do not attempt operation if the AC supply and 

cord are not within the specified voltage and power range. Refer to the license label 
on the back of the projector or 

Section 7 Specifications

 for rated voltage and power.

  The projector is equipped with a 3-wire plug with a grounding pin. This is a safety 

feature. If you are unable to insert the plug into the outlet, contact an electrician to 
have the outlet replaced. NEVER defeat the safety purpose of the grounding-type 
plug.

  Do not allow anything to rest on the power cord. Locate the power cord where 

persons walking on it or objects rolling over it cannot damage the cord.

1.4.3 Lamp Precautions

  Never attempt to access the lamp while the lamp is ON. After turning the lamp OFF, it 

is crucial that you wait at least 5 minutes before handling the lamp. This provides 
sufficient time for the lamp cooling fans to properly cool the lamp. For all other 
precautions critical for safe removal and replacement of the lamp, refer to 

5.1.1 Lamp 

and Filter Replacement

.

Содержание Roadster HD14K-J























































































































































































Отзывы:

Нет отзывов