manualshive.com logo in svg

Christie Roadster HD14K-J, Руководство пользователя, Страница: 101 / 182

Поделиться
Скачать
Christie Roadster HD14K-J Скачать руководство пользователя страница 101

Section 3: Operation

J Series 2.0, 2.4, and 3.0kW User Manual

3-45

020-100707-01  Rev. 1  (10-2011)

•

Show Blending Overlap

 

turns your defined blend width area to solid grey so that, if needed, simply 

overlapping the grey bars can seamlessly align two adjacent images. Toggle the 

Show Blending Overlap

 off 

to reactivate the blend effect.

 

NOTE:

 Blending Overlap appears as 

Reserved

 when Christie TWIST is 

installed.

Other Functions

For convenience, the 

Edge Blending

 submenu also includes related options for enabling a specific color and/

or test pattern, or for working with colors or the lamp. Such functions duplicate those provided elsewhere in 
the menu system.

Edge Blending Procedure

NOTES: 1)

 

Before attempting to work with edge blending software functions, align the projectors/images by 

correctly overlapping the displays from your intended external source. 

2) 

Match colors and the brightness 

uniformity.

IMPORTANT!

 For a shared edge, all blend procedures and settings should be identical on both projectors.

1. Start with two projectors. Display full white field test pattern from both.
2. In the 

Edge Blending

 submenu, enable 

Edge Blending

 by entering a checkmark in the top check box.

3.

SET STARTING POINTS FOR ADJUSTMENT

a. Set all blend widths to 0.
b. Go to 

More 

and set everything in the 

Edge Blending

 

menu to 50.

4.

SET BLEND WIDTH

 On one projector, increase the 

Blend Width

 for an overlapping edge (for example, if 

the projector image is on left, its right edge overlaps the adjacent image—adjust 

Right Blend Width

). Use 

the same setting on the second projector for this shared edge.

5. Re-adjust width (both projectors) until the overly bright band at the midpoint of the overlapping blends 

disappears or 

just

 changes to very light grey. For the shared edge, use the same 

Blend Width

 setting on 

each projector. 

NOTE:

 

If the best blend appears to be between two settings, select the wider setting for both 

projectors.

6.

CHECK BLEND

 

If the blended region appears too dark or light in relation to the rest of the image:

a. Increase 

Blend Midpoint 

in both projectors to “lighten” the overall blend, decrease to “darken” the 

overall blend.

b. Adjust 

Blend Shape

 in both projectors to fine-tune change the amount of mid-grey intensity (as 

opposed to black/white) in the blend.

7. Repeat with remaining projectors / overlaps.
8. Check completed display wall with the desired external signal.
9. If necessary, adjust the mechanical alignment to maintain perfect pixel-on-pixel alignment over time.
In applications where you are projecting only white or light images, the 

Blend Width

 may be slightly higher—

set according to how much overlap you have between images. Use the following as a guide (examples show 
overlapping width only—values for overlapping height will differ). 

NOTE:

 

Recommended overlap is 12.5% - 

25%.

Содержание Roadster HD14K-J























































































































































































Отзывы:

Нет отзывов