manualshive.com logo in svg

Christie Roadster HD14K-J, Руководство пользователя, Страница: 75 / 182

Поделиться
Скачать
Christie Roadster HD14K-J Скачать руководство пользователя страница 75

Section 3: Operation

J Series 2.0, 2.4, and 3.0kW User Manual

3-19

020-100707-01  Rev. 1  (10-2011)

RESIZE PRESETS

NOTE: 

The same resize presets are available to all HD and SXGA+ screen models. However, the graphics 

used to describe each preset in this section are of the SXGA+ models only.

 

Resize Presets

 will display an image in its native 

resolution (no resizing) or will resize the image 
by maximizing either the height, width or both 
height and width, or will resize to the maximum 
size possible while keeping the original aspect 
ratio. 
Size, Position and Blanking parameters will 
automatically adjust accordingly or, if Blanking 
is set first, which defines an Active Input Area;

 

Resize Preset

 scaling will occur in this region of 

interest only. Resizing options are explained 
below.

WHAT IS THE RESIZING DEFAULT?

 

By default when displaying a new source, your image will utilize as much of the projector display area as 
possible for the type of incoming source data, but with minimal or no changes to aspect ratio. See 

Select 

“Default”

 below.

The “Custom” re-size descriptor automatically appears in the 

Size and Position

 menu when any of the values 

for 

Size, Vertical Stretch, H-Position, V-Position 

or 

Blanking

 do not correspond to those for a preset. This 

option is not offered in the 

Resize Presets

 pull-down list.

• Select 

DEFAULT

 for most sources (factory default). The image will be centered and displayed as large as 

possible 

depending on the type of source.

F

IGURE 

3-19 R

ESIZING 

D

EFAULT

NO RESIZING - displays the image in its native resolution, which may or may not match the projector 
resolution. For example, for a source with a native resolution of 800 x 600, “No Resizing” in an SXGA+ 
projector will use the central 800 x 600 pixels and have a black border—the black border areas are unused 
areas, see below.

F

IGURE 

3-18 R

ESIZE 

P

RESETS

Содержание Roadster HD14K-J























































































































































































Отзывы:

Нет отзывов