Christie CP2000-SB, Руководство пользователя

Страница: 179 / 203

B-6 CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Section 1: Introduction
GPIO Assignments (GIO) requires v2.7 or higher
(GIO i3 l “LampOff”)
(GIO i3 h “LampOn”)
(GIO ? I3H)
(GIO ? I3h “lampon”)
(GIO ? I3L)
(GIO ? I3l “lampoff”)
(GIO o3 “SystemHealth”)
(GIO? o3)
(GIO! o3 “System Health”)
Allows macros to be assigned to GPIs and GPOs.
Important!
Changing to a 3D channel with GPIO usage will
permanently delete the macro assignments for those GPIOs;
therefore, it is suggested that those GPIOs used for 3D channels
not be used for macros.
P1 = input # (1-5) or output # (1-5)
P2 = “Macro Name”
Predefined GPI macros:
“LampOn”
“LampOff”
“DouserOpen”
“DouserClosed”
“AuxLensIn”
“AuxLensOut”
“Channel 101” through “Channel 116”
Predefined GPO macros:
“System Health”
“Lamp State”
“Douser State”
“Auxiliary Lens State”
Image Scaling Enable/Disable (IMS)
(IMS 0) Enables or disable image scaling
0 = disable
1 = enable
Intelligent Lens System (ILS) requires v2.9 or higher
Method of reading and writing ILS information. See Section B.2.4
Intelligent Lens System (ILS)
Internal Test Pattern (ITP)
(ITP “RGB-12Bbit-Split Ramp”)
(ITP””) Enter “test pattern filename” to display pattern.
Enter “” to turn off the test pattern.
Function Code / Examples Description and Parameters