Chint Power CPS PSW1.5M-1500V, Руководство пользователя

Страница: 31 / 84

30
6 Electrical Installation
6.1 Safety Instructions
DANGER:
High voltage! Electrical hazards!

Do not touch the live components of the device.

Make sure the AC and DC sides are voltage-free before installation.

Never put flammable materials in the vicinity of the inverter.
DANGER:
If a ground fault occurs to the PV system, some parts that were voltage-free before
may contain lethal voltage. Accidental touch may cause serious damage. Make sure
there is no system ground fault before operation and take proper protection measures.
WARNING:

Observe all the country-specific standards and regulations.

Connect the inverter to public grid only after receiving authorization from the
local network operator.
WARNING:
Only professional electricians can perform the operations described in this chapter.
Observe all the instructions to connect the wires.
WARNING:
Disconnect all AC and DC Switches before electrical connection.
WARNING:
Sand and moisture penetration may affect the performance of electric devices inside
the container!

Do not perform electrical connection in sandy season or when the ambient
relative humidity is above 95%.

Perform electrical connection at fine weather days.
WARNING:
If the star connection is used for the winding of the low voltage side of a dual split
transformer and N terminals are used, the N terminals cannot be connected or
grounded.
WARNING:
Improper torque used may cause fire to the connection point!
Fix the bolts by strictly following the torque requirements in this manual during
electrical connection.