Chint Power CPS PSW1.5M-1500V, Руководство пользователя

Страница: 12 / 84

11
2.2.10 LCD Parameter Setting
Certain LCD settable parameters are closely related to the container and internal devices operation,
therefore these parameters can only be set after reliable evaluation of the system.
WARNING:

Improper parameter setting may affect the functionality of the device.

Only qualified personnel can set the parameters.
2.2.11 Sand and Moisture Protection
Do not open the container door in sand storm, thunderstorm, strong wind or hail days or when the
ambient humidity is above 95%.
2.2.12 Symbols on the Device Body
Symbols on the devices body contain important information on the safe operation of the container
and its internal devices. Do not tear or damage them!
NOTICE:
Do not damage or tear the symbols.

All symbols on the device body must be clearly visible.

Replace the symbols once any damaged or unclearness is detected.
2.2.13 Safety Warning Signs
During transport, installation, maintenance and troubleshooting of the container, keep non-related
persons away.

Post warning signs near the container upstream and downstream switches to prevent
accidental connection.

Place necessary warning signs or barriers near the on-site operation areas.
2.2.14 Daily Operation and Maintenance
Make sure the container doors are closed and locked during daily operation to prevent internal
devices from damages by rain or rodents.
Routine check and maintain the container and internal devices to ensure long and reliable
operation of the container.
WARNING:
Make proper insulation protection during live line operation. At least two persons are
required until the operation is done.
Proper field rescue facilities are necessary since the location of most PV container is
far away from the urban areas.
Take the followings into consideration during daily operation and maintenance:

Nameplates are pasted on the container internal devices, like the inverter, power distribution
cabinet and etc. They contain very important parameter information about the devices.
Protect the nameplates during all operations.