SVX8016 IP PBX System User Guide
陈泽科技有限公司
- 28 -
www.stephen-tele.com
the server is reachable.
Caller ID:
The Caller ID (CID) string used when this trunk calls another user or number.
Registration Time:
Defines the outgoing registration duration, range from 0 to 3600 seconds.
Codecs
:
Select the codecs which can be accepted by this provision in order of the preference.
From User:
Override the caller id in the “from” sector of the SIP packages.
From Domain:
When making outbound SIP invites to non-peers, use your primary domain "identity" for the “from”
headers instead of just your IP address in the SIP packages. This is to be polite and it may be a mandatory
requirement for some destinations which do not have a prior account relationship with your server.
Outbound Proxy:
Send outbound signaling to the proxy instead of directly to the peer. Enter the Outbound proxy IP
address followed by “:” and the port number. For example
192.168.0.1:5060
Call limit
:
The maximum number of simultaneous calls can be placed.
Save:
Save the changes.
Cancel:
Discard all changes.
Activate:
Submit the changes to the system to take effect.
3.5.2.
to PSTN via FXO
User can connect PSTN line to the onboard line port of SVX8016 to make outbound call.
Click “Service Provision” menu and “ to PSTN via FXO” submenu.
Provision Name:
A description name for memorization.
National:
Nation where SVX8016 resides.
Waittodail:
The time between FXO port off hook and sent out numbers, in millisecond.
Tone zone:
Select from the drag down list to define the tone standard of this trunk.
Impedance:
Select from the drag down list to define the impedance standard of this trunk.
Save:
Save the changes.
Cancel:
Discard all changes.
Activate:
Submit the changes to the system to take effect.
3.5.3.
to PSTN via Gateway
User can connect a PSTN line to a gateway and then register the gateway to SVX8016 to make outbound call.
Click “Service Provision” menu and then “to PSTN via Gateway” submenu.
