SVX8016 IP PBX System User Guide
陈泽科技有限公司
- 21 -
www.stephen-tele.com
Caller ID:
The caller ID string used when this user calls another user or number.
DTMF Mode:
Defines how the extension handles DTMF signaling. Default is RFC2833.
Qualify:
Select yes to allow device to check if the client is reachable. The check arises every 2000 milliseconds if
the client is reachable.
Permit
：
Specify an IP or an IP range that can use this number.
Deny:
Opposite to permit.
Options:
Click to enable the optional functions for the number.
Call Waiting:
You will hear some signal tone when you are already on the line and someone else calls in. Notice:
To use call waiting feature, the call limit must be greater than 1.
Voice mail:
Enable the voice mail feature for this extension.
Caution:
You must plug in a CF card in order to use the voice mail functionality.
Is Agent:
Set the number as a potential call queue member (agent). Only potential call queue members can join a
call queue, and only members in a call queue can call
*980#
to login to the queue in order to start answer calls
from the queue.
Follow me:
This feature allows you to receive calls at multiple numbers you designate. If you do not pick up at first
location the system will sequentially ring the second and then the third number that you specify. You
need designate follow me numbers in the number list section.
Number list:
Specify the numbers that the follow me feature used. Notice that you can add no more than 3 numbers
into the number list. Numbers are separated by new line.
Timeout (sec):
Specifies a maximum time, in seconds, that the follow me function will wait for someone to pickup the
phone in one destination before it transfers the call to next one. Range from 10 to 45 seconds.
Codecs
:
Select the codecs which can be accepted by this extension in order of the preference.
BLF Group
:
Busy lamp field. Tick to allow this extension to supervisor the existing BLF group.
Save:
Save the changes.
Cancel:
Discard all changes.
Activate:
Submit the changes to the system to take effect.
3.3.2.
FXS Extension
Click “Extension” menu and “FXS extension” submenu, the add FXS extension page will appear.
