SVX8016 IP PBX System User Guide
陈泽科技有限公司
- 8 -
www.stephen-tele.com
Using FXS port:
Pickup the phone connected on the first Ext port, dial “
*100#
” to enter the administrative IVR, and then follow the voice
instruction, press “0” key to listen for the LAN port IP address of the device. The default password of the administrative IVR
is “8888”
Using console port:
Connect one end of the RS232 cable to the console port on the front panel of the device, the other end to the
computer’s RS232 port.
Open the HyperTerminal software on your computer. Change the baud rate to 115200 and leave other options
unchanged.
Use account “root” and password “
*#@8016@#*
” to login to the console.
Enter the command “ifconfig”. The device’s LAN port and WAN port IP addresses will be shown on the screen.
3.1.2.
Login into the Web interface
Make sure your computer is in the same subnet with the device by modifying your computer’s IP address to match the
device’s IP address.
Start web browser. Enter the IP address of the device into the address bar. The login page will appear:
Enter the user name and password to login, the default user name is “admin”, and password is “admin” too.
3.1.3.
Web interface overview
After successful login, the desktop screen will appear.
