ENGLISH
.
Cod. 9828093300 00 - Vers. 04/2019 - 55
16.0 STORAGE
If the machine is to remain inactive for long periods:
- Shut down the machine using the button Ref. 3 Fig. 22: in this way, the machine will stop after the unloading run time.
- Close the tap Ref. 1 Fig. 22 (machine with / without tank).
- Remove the panel Ref. 8 (with dryer only)
-
Depressurise the dryer by pressing the “TEST” button of the condensate drain (for about 10
-20 seconds) Ref. 2 Fig. 22 (machine without tank).
- Depressurise the dryer and tank, opening the condensate drain tap Ref.7 Fig.22 (machine with tank).
- Remount the panel Ref. 8 (with dryer only)
- Close the tap Ref. 7 Fig.22 after having completely discharged the air under residual pressure.
- Disconnect the power supply using the disconnect switch Ref. 4 (for screw compressor) and Ref 5 (for dryer if included) Fig. 22.
During downtime, the machine must be protected against atmospheric agents, dust and humidity, which may damage the motor and
electrical system. Moreover, the compressor must be placed into operation once per month.
For the subsequent start-
up, consult the manufacturer’s technical se
rvice centre.
17.0 DISMANTLING THE COMPRESSOR UNIT
If the machine is dismantled, it must be separated into similar parts for disposal in accordance with local regulations in force.
IT IS RECOMMENDED TO COMPLY WITH REGULATIONS IN FORCE FOR THE DISPOSAL OF USED OIL AND OTHER
POLLUTING MATERIALS SUCH AS THERMAL INSULATING SOUNDPROOF FOAM, ETC.
FIG. 22
2
8
1
5
4
3
1
7