Chicago Pneumatic CPF 175, Инструкция

Страница: 26 / 152

• In option, the centralized management of up to 4 compressors equipped with an AIRLOGIC ®
.
The exceptional modularity of the AIRLOGIC
®
allows connecting additional electronic modules to add
logical and/or analog inputs/outputs necessary for certain special applications (the modules available are
described in section
External communication ). For example, the pressure loss of the air treatment chain can
be managed from the AIRLOGIC
®
.
Indication of maintenance operations
When a maintenance operation becomes necessary, either because the machine has reached the number of
hours necessary before an intervention or because a sensor has detected a limit, a red indicator flashes and a
message is displayed indicating the nature of the operation. The machine does not stop.
Management of warnings
The warning characterizes either a maintenance operation or a warning limit before reaching the limit of the
fault, which when reached, would stop the machine. This allows anticipating a malfunctioning and dealing
with it without compromising your production of compressed air. The indication of the nature of warning is
transmitted to the AIRLOGIC
®
.
Management of functional faults
On the appearance of a functional fault, the AIRLOGIC
®
stops the compressor, indicates the fault by a red
fault indicator and displays the message allowing rapid identification of the cause of the incident.
An entry is added to the menu History of faults, displaying the nature of the fault, the date and the time as
well as the value of certain parameters recorded when the fault appeared.
Programming of pressure timers
The real time clock of the AIRLOGIC
®
allows, after programming the pressure timers, automatic starting
and stopping of the compressor. While programming the loaded running, two pressure limits are available
allowing to vary the control pressure over a time, depending on the applications.
Instruction book
24 2920 1804 00