Chevrolet 2013 Cruze, Руководство пользователя, Страница: 93 / 292

INTERIOR LIGHTING
INSTRUMENT PANEL
ILLUMINATION CONTROL
Brightness of the following lights can
be adjusted when the exterior lights are
on:
 Instrument panel illumination

Steering wheel controls

Info-Display

Climate control operation elements

Illuminated switches
Turn knob and hold until the desired
brightness is obtained.
INTERIOR LIGHTS
Courtesy light
During entry and exit of the vehicle, the
courtesy lights automatically switch on
and then off after a delay. It switches on
for a short time even if the key is
withdrawn from the ignition lock.
Operate rocker switch:
= Automatic switching
on and off
Press = Always on
Press = Always off
READING LIGHTS
Operated with and buttons.
Warning
Avoid using the interior lights while
driving in the dark. A lit passenger
compartment reduces visibility in the
dark, and could cause a collision.
SUNVISOR LIGHTS
Illuminates when the cover is opened.
LIGHTING FEATURES
ENTRY LIGHTING
Welcome lighting*
Sidelights and interior lights are
switched on by unlocking the vehicle
with the remote control for a short time.
This function facilitates retrieving the
vehicle when it is dark.
The lighting switches off immediately
when the ignition is turned to the
accessory position.
Activation or deactivation of this
function can be changed in the menu
Settings in the Info-Display. Vehicle
personalisation 78.
The settings can be stored by the key
being used 21.
Entrance lighting
The following lights will additionally
switch on when driver's door is opened:

Some switch lights
 Some interior lights
EXIT LIGHTING
Headlights and tail lights illuminate the
way for an adjustable time after leaving
the vehicle.
Switching on
The following process is only applied
to vehicles that do not have an auto-
matic light function. The light switch
has to be in position OFF. If the driver's
door is closed, the lights will be
switched off automatically after the set
time.
1. Switch off ignition.
2. Remove ignition key.
3. Open driver's door.
4. Pull turn signal lever.
5. Close driver's door.
If the driver's door is not closed the
lights switch off after two minutes.
The lighting is switched off immed-
iately if the turn signal lever is pulled
while the driver's door is open.
Activation, deactivation and duration
of lighting of this function can be
changed in the menu
Settings
in the
Info-Display. Vehicle personalisation
3 78.
The settings can be stored by the key
being used 21.
89 Lighting 88 Lighting