
Display of remaining engine oil life
The remaining engine oil life duration
is displayed in the Driver Information
Center by the control indicator , fol-
lowed by a percent value which shows
the remaining engine oil life. For this
purpose the ignition has to be switched
on without engine running.
Driver information center 74.
Service information 217.
Reset the system whenever the engine
oil is changed so that the system can cal-
culate the next engine oil change. To
reset the engine oil life system, depend-
ing on model and country variant, do
one of the following:
Using a scan tool:
Your CHEVROLET retailer will
reset the system using this tool after
changing the engine oil.
Using accelerator pedal:
◆
Remove key from ignition switch
or with
Start/Stop
system switch
off ignition for more than one min-
ute.
◆
Insert key in ignition switch and
turn key to position
2
or with
Start/Stop
system switch on igni-
tion (ignition on but with engine
off).
◆
Fully press the accelerator pedal
and hold for two seconds.
◆
Release the accelerator pedal for
two seconds.
◆
Repeat pressing and releasing of
the accelerator pedal as described
above two times within one min-
ute.
Using the
SET/CLR
button on vehi-
cles with Midlevel-Display:
Press the
MENU
button on the turn
signal lever to select the
Vehicle
Information Menu
. Turn the
adjuster wheel until the menu with
the remaining engine oil life dura-
tion is displayed. Press
SET/ CLR
button for a few seconds with igni-
tion on. If
Code 82
still appears in
the Driver Information Center after
the vehicle has been started, the
engine oil life system has not been
reset. Repeat the procedure.
Using the reset knob on vehicles
with Baselevel-Display*:
How to reset the engine oil life
system
%
68 Instruments and controls
Press reset knob for about 5 seconds
until the remaining engine oil life is dis-
played. Release the reset knob and
press again for a few seconds to reset
the engine oil life system.
CONTROL INDICATORS
The
control
indicators
described
are not
present
in
all
vehicles. The description
applies
to
all
instrument versions.
When
the
ignition
is switched
on,
most
control
indicators will
illuminate
briefly
as
a
functionality test.
The
control
indicator
colours
mean:
Red
= Danger
,
important
reminder
Yellow = Warning, information, fault
Green = Confirmation
of
activation
Blue
=
Confirmation
of
activation
White
= Confirmation
of
activation
69
Instruments and controls
Содержание 2013 Cruze
