Chevrolet 2013 Cruze, Руководство пользователя, Страница: 134 / 292

BOOT LID TAIL LIGHTS
1. Remove the boot lid panelling.
2. Rotate bulb holder anti-clockwise.
3. Remove bulb holder. Push bulb into
socket slightly, rotate anticlockwise,
remove and renew bulb.
4. Insert bulb holder into boot lid. Refit
the inner panelling to boot lid.
5. Switch on ignition, operate and
check the lights.
INTERIOR LIGHTS
Courtesy light
,
Reading lights
Have bulbs replaced by a CHEVROLET
retailer.
Load compartment light
1. Prise the lamp out with a screw-
driver.
130 Vehicle care
2. Press bulb slightly towards spring
clip and remove.
3. Insert new bulb.
4. Install lamp.
ELECTRICAL SYSTEM
FUSES
Data on the replacement fuse must
match the data on the defective fuse.
There are two fuse boxes in the vehicle:

In the front left of the engine com-
partment,
 Behind the glove box.
In a box above the positive terminal of
the battery are some main fuses. If nec-
essary have them changed by a
CHEVROLET retailer.
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its
melted wire. Do not replace the fuse
until the cause of the fault has been rem-
edied.
Some functions are protected by sev-
eral fuses.
Fuses may also be inserted without
existence of a function.
131 Vehicle care