Chevrolet 2013 Cruze, Руководство пользователя, Страница: 74 / 292

CONTROL INDICATORS IN THE INSTRUMENT
70 Instruments and controls
TURN SIGNAL
illuminates or flashes green.
Flashes
The control indicator flashes if a turn
signal or the hazard warning flashers
are activated.
Fast flashing: Failure of a turn signal
light or associated fuse.
Bulb replacement 126. Fuses 132.
Turn signals 86.
SEAT BELT REMINDER
for driver's seat illuminates or flashes
red.
Illuminates
4 seconds after ignition is switched on,
100 seconds after starting the engine or
after reaching a specific distance
respectively speed until the seat belt is
fastened.
Flashes
For 100 seconds after starting the
engine or reaching a specific distance
respectively speed until the seat belt is
fastened.
Fastening the seat belt 43.
AIRBAG AND BELT
TENSIONERS
illuminates red.
When the ignition is switched on, the
control indicator illuminates for about 4
seconds. If it does not illuminate, does
not go out after 4 seconds or illuminates
whilst driving, there is a fault in the belt
tensioner or in the airbag system. The
systems may fail to trigger in the event
of an accident.
Deployment of the belt tensioners or
airbags is indicated by continuous
illumination of .
Warning
Have the cause of the fault eliminated
immediately by a CHEVROLET
retailer .
Airbag system, belt tensioners 45,
3
42.
CHARGING SYSTEM
illuminates or flashes red.
It illuminates when the ignition is
switched on and goes out shortly after the
engine starts.
Illuminates when the engine is
running
Stop, switch off engine. Battery is not
charging. Engine cooling may be inter-
rupted. In diesel engines, power to the
brake servo unit may be cut. Seek the
assistance of a CHEVROLET retailer.
Flashes*
When key is held in position
3
for longer
time, the control indicator flashes and
vehicle enters battery saving mode.
MALFUNCTION INDICATOR
LIGHT
illuminates or flashes yellow.
It illuminates when the ignition is
switched on and goes out shortly after
the engine starts.
71 Instruments and controls