Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 98 / 150

92
IO LAN +
- User and Administration Guide
The parameters are as follows:
Sitename
This is the IP name or IP address of the remote
site IOLAN+ will be calling.
User name
This is the user name required by the remote
system for logging in. You may use the
\u in
your login script in lieu of the full name.
Password
This is the above user name’s password as
required by the remote system. You may use the
\p in your login script in lieu of the full password.
Device type
This is the name of the modem device as
defined in the
Remote Site Devices screen. You
may have several ports setup with the same
device type, and the dialer daemon will use the
first available. If a device for dialing out is not
available, IOLAN+ will return an ICMP ‘host
unreachable’ message (ICMP type 3 code 1).
Service type
This specifies which protocol will be used when
the link is established to the remote site.
Choices are SLIP, CSLIP or PPP.
Inactivity
This is the period of inactivity on the SLIP/PPP
link before the port will drop the call
automatically. Setting this field to
0 turns the
timeout feature off.
Phone number
This is the phone number of the remote system.
The ‘\’ may be used as a delay. For example, a
phone system that requires a 9 followed by a
four-second delay before getting an outside line
would require an entry like 9\4-2145551234.
Login-script
This is the chat script that will be used to login
to the remote system. It takes the form of the
usual Send/Expect chat script you may already
be familiar with. If no script is defined, this step
is skipped (e.g. hardwired connections).