manualshive.com logo in svg

Chase Research IOLAN+, Руководство пользователя и администратора

Поделиться
Скачать
Chase Research IOLAN+ Скачать руководство пользователя страница 101

95

The Menu Interface

The parameters are as follows:

Auth Host

The IP name or address of the authentication
host to validate incoming users.

Authentication

Port

The TCP port number of the authentication
host, usually 23 (telnet) or 513 (Rlogin).  A
proprietary network number may be chosen to
provide a personal user validation scheme.
Default is 

23 (telnet).

Login Prompt

The user authentication prompt expected from
the host by IOLAN+.  Default is 

ogin:

Password

Prompt

The password prompt expected from the host by
IOLAN+ during the authentication connection.
Default is 

Password:

Success

Indication

String

The string returned by the authentication host
on successfully logging in.  Default is 

last

Failure

Indication

String

The string returned by the authentication host
on a failed login attempt.  Default is 

ogin

incorrect.

Maximum

Login

Attempts

The maximum number of login attempts a user
is allowed before the line is reset.  For modem
users the control lines DTR is toggled, the port is
disabled for 3 seconds.  Default is 

3.

Login Timeout

This time defines the maximum time in seconds
for the user to enter authentication information,
once login time-out is exceeded the line is reset.
Default is 

60.

Disconnect

Probe

An option to keep the per port authentication
connection up during the clients’ session.  Default
is 

Yes.  This allows a user connect time to be

measured by a simple ‘do nothing’ telnet session.

Содержание IOLAN+























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды