Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 89 / 150

83
The Menu Interface
Dst
This is the destination IP address of the PPP/SLIP
connections. If blank, the remote host must
supply the IP address. If filled in, you designate
an assigned IP address to loan the remote host.
If the
secure field on the Port Menu is No, this
can be overridden by the incoming host.
Mask
This is the subnet mask which controls the
range of IP addresses accessible from the port
(when using remote access).
Options
This section of the menu deals mainly with the telnet options
and is the least used. Most of these options default to
No.
Keepalive
This option specifies whether IOLAN+ should
send keepalive messages to the host machines it
is connected to. Default is
No.
Rlogin/Telnet
This field specifies which of the two options
should be listed first in the
Commands menu.
Default is telnet.
Debug options
This field defines whether the telnet options
processing should be displayed and is used for
troubleshooting. Default is
No.
Map CR to
CR LF
This field defines whether the IOLAN+ will add
a line feed to every carriage return on data
going out to the serial port. Default is
No.
Hex data
When this field is set to Yes, IOLAN+ displays
all of the data it receives on this port in hex
format as well as in ASCII. This is used for
troubleshooting. Default is
No.
Secure
Specifies the level of security to be applied to
the port in question. There are four selectable
values. Default is
No.