manualshive.com logo in svg

Chase Research IOLAN+, Руководство пользователя и администратора

Поделиться
Скачать
Chase Research IOLAN+ Скачать руководство пользователя страница 129

123

Troubleshooting & Maintenance

1.

Self-test

2.

Diagnostics

3.

Monitor

4.

Download

5.

Reset

q.

Quit and boot server firmware

Self-test

This is for troubleshooting with Chase support only.  It runs a
signal level check on every port (and requires loopbacks on
all ports).  It also performs the Ethernet and RAM test (as in
the diagnostics).

Diagnostics

This option will run a set of hardware diagnostics tests.  If
you get any errors report them to your supplier or Chase
support.  There are three options:

a.

Serial ports:  You will need a loopback
connector to run this test (provided with the
unit).  Put it on the suspect port.

b.

Ethernet interfaces:  This option allows you to
test the Ethernet ports.  You will need Ethernet
loopbacks.  10BASE-T is provided, for 10BASE5
use a MAU, and for 10BASE2 use a T-connector
with two terminators.  Connect suspect loopback.

c.

Memory/RAM test:  This option tests the RAM
of the unit and reports any faults.  The test takes
about 1 minute to complete.

Monitor

This is for troubleshooting with Chase support only.

Download

It allows firmware to be downloaded via port 2 or an
Ethernet interface via TFTP.

Содержание IOLAN+























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды