13
Installing your IOLAN+
Here is the sequence to use:
arp -s 205.17.209.8 00:80:D4:00:33:4e
telnet 205.17.209.8
password>
local>
At the password prompt, just hit
since this is not set yet.
The IP address still needs to be configured on the unit (ARP
has only allowed you to connect to the unit so far).
Note: If there are any errors, recheck both the IP and
Ethernet addresses you keyed in (this is the most common
error here). See
Troubleshooting & Maintenance
(Appendix B) for more information on problems.
You can now skip the next section and go straight to
section
2.5,
The Menu System.
2.4 Communicating
via a
Terminal or
PC
You can connect to IOLAN+ using a terminal or PC (with a
terminal emulation package such as Hyperterm).
Connect a terminal or your PC to port 1. The IOLAN+ serial
ports are DTE type RS-232 ports. When connecting a terminal/
PC directly (without modems), the RS-232 signals need to be
crossed over (‘null modem’ cable). See the
(Appendix C) for pinout information.
For a terminal/PC to communicate with a server, set it to the
following: 9.6 kbps, eight data bits, one stop bit, software
flow control, no parity.
After powering up IOLAN+, you are prompted to enter a
‘Local login:>‘. You can just hit any character and
at this
point (the character is required).
Содержание IOLAN+
