Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 26 / 150

20
IO LAN +
- User and Administration Guide
All of the procedures are based around the Port Setup Menu.
This is accessed through the Administration Menu (password
level). Remember, that if you are not in the password level,
you can only view the information, not change it.
Here is the Port Setup Menu:
** Administrator ** PORT SETUP MENU REMOTE-ADMIN
Hardware Flow ctrl Keys
Speed [9600 ] Flow ctrl [XON/XOFF] Hot [^]] Intr [^C]
Parity [None] Input Flow [Enabled ] Quit [^@] Kill [^U]
Bit [8] Output Flow [Enabled ] Del [^@] Sess [^@]
Stop [1 ] Echo [^@]
Break [Disabled] IP Addresses
Monitor DSR [No ] Src [ ] Mask [ ]
Monitor DCD [No ] Dst [ ]
User Options Access
Name [ ] Keepalive [No ] Access [Local ]
Terminal type [ansi ] Rlogin/Telnet [Telnet] Authentication [None ]
TERM [ ] Debug options [No ] Mode [Raw ]
Video pages [0] Map CR to CR LF [No ] Connection [None ]
CLI/Menu [Menu] Hex data [No ] Host [ ]
Reset Term [No ] Secure [No ] Remote Port [0 ]
MOTD [No ] Local Port [10006]
________________________________________________________________________________
Figure 12: Port Setup Menu.
This menu allows the user to set up all the parameters
associated with a port. The administrator can alter the set-up
of any port on the communications server while a user can
only alter the set-up for their own port.
This menu is divided into the following sections:
Hardware: Defines port type and is used for setting up the
hardware configuration of the modem, terminal,
printer or PC session. This section is always used.
User: Defines various user parameters such as name and
terminal type. Most fields are used in this section.