Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 33 / 150

27
Terminals on Multi-user Systems
Monitor DSR: You can set this field to Yes if you wire the
terminal’s DTR signal pin 20 to the IOLAN+
DSR signal pin 6 (
see Cabling Guide). When
you turn the terminal off, it will reset the
IOLAN+ port, which tells the Unix host to kill
the user’s processes.
3.2 Host Table
Setup
In order for IOLAN+ to connect easily to machines on the
network it must know the IP addresses of the other
computers. IOLAN+ can have its own internal table of IP
addresses set up in the host table. This is a ‘local’ naming
system only. IOLAN+ can also use the name server utility of
your Unix system (consult your Unix system manual and
section 2-6,
Tips).
The
Host Address Menu is accessed from the Administration
Menu by selecting the host entry. The host table can contain
up to 10 addresses. Each entry consists of a host name and
its corresponding IP address.
** Administrator ** HOST ADDRESS MENU REMOTE-ADMIN
Entry Host name IP Address
1 [fred ] [204.17.209.70 ]
2 [astro ] [204.17.209.6 ]
3 [router ] [204.17.209.254 ]
4 [chase ] [204.17.209.1 ]
and so on…
________________________________________________________________________________
Figure 14: Host Address Menu Screen.
You can fill in an entry (both the name and the IP Address)
for your host machines and then save the values by pressing
the
key.