Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 29 / 150

23
Installing your IOLAN+
This allows the administrator to configure one IOLAN+, save
its configuration and automatically configure subsequent
units via bootp.
Should the configuration of your IOLAN+ ever be corrupted
because of user error or damage, it is an advantage to have
the configuration stored somewhere for easy re-installation.
This can be achieved by uploading the configuration of the
unit to a host on the network. To do this, enter the
Communications Server Menu from the Administration
Menu. Select the Init file entry of this menu.
Set this to the full pathname of the file in which you wish to
store the configuration. Set
Boot host to the host machine
you wish the file to reside within and save these entries.
Boot host: rockvegas (or ip address)
Init file: /tftp/term_serv.cfg
Log onto the host machine in the normal manner and create
the file you have specified in the IOLAN+ menu, this could
be as shown below:
touch term_serv.cfg
Note: This file must exist before you can write to it.
The file requires the correct read/write permissions to be
downloaded. Return to the
Connections menu of the IOLAN+
and temporarily select the CLI interface (if you are not using it
already). This can be accomplished by hitting
and
selecting the CLI option in the pop up menu at the
iolan>
prompt. Use the CLI as the administrator, by typing:
su
and enter the password, now type:
save config