Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 92 / 150

86
IO LAN +
- User and Administration Guide
Access
This section controls the type of the connection made from
this port. This is the most important section in defining a
port. The parameters are as follows:
Access
This field defines the type of service that is
operating on this port. Default is
Local.
Local
This is the normal setting for terminals/PCs.
Remote
This setting indicates IOLAN+ should be
listening on the ethernet for connections from
a remote host. The TCP port for the
communications server to listen on, must be
entered in the
Local Port field. This setting
should be used for printers, dial-out modems
and reverse telnet connections.
Dynamic
This setting should be used for dial-in/dial-
out modems. This setting is a combination of
the local and remote settings. The
communications server listens both on the
serial port for incoming characters and on the
network for incoming connections. When it
gets either, it behaves as the appropriate type
of connection until that session is terminated,
whereupon it goes back to listening again.
SLIP
This will set the port into SLIP mode.
PPP
This setting puts the port into a dedicated
PPP line.
Listen
This setting is similar to Remote, however,
DTR/RTS will only be raised once a network
connection is establish.
None
Sets port to disabled.
CSLIP
This setting puts the port into dedicated
CSLIP status.