Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 85 / 150

79
The Menu Interface
9.3 Port Setup
Menu
This menu allows the user to set up all of the parameters
associated with a port. The administrator can alter the set-up
of any port on the IOLAN+ while a user can only alter the
set-up for their own port.
** Administrator ** PORT SETUP MENU REMOTE-ADMIN
Hardware Flow ctrl Keys
Speed [9600 ] Flow ctrl [Hardware] Hot [^]] Intr [^C]
Parity [None] Input Flow [Enabled ] Quit [^@] Kill [^U]
Bit [8] Output Flow [Enabled ] Del [^@] Sess [^@]
Stop [1 ] Echo [^@]
Break [Disabled] IP Addresses
Monitor DSR [No ] Src [ ] Mask [ ]
Monitor DCD [No ] Dst [ ]
User Options Access
Name [LPD_printer ] Keepalive [No ] Access [Remote ]
Terminal type [ ] Rlogin/Telnet [Telnet] Authentication [None ]
TERM [ ] Debug options [No ] Mode [Raw ]
Video pages [0] Map CR to CR LF [No ] Connection [None ]
CLI/Menu [Menu] Hex data [No ] Host [ ]
Reset Term [No ] Secure [No ] Remote Port [0 ]
MOTD [No ] Local Port [515 ]
Figure 30: Port Setup Menu.
This menu is divided into several separate sections, each of
which can be accessed independently by the administrator.
To simplify the sequence, these are described separately.
Hardware
The hardware section defines port type and is used for setting
up the hardware configuration of the modem, terminal,
printer or PC session. This section is always used. The
parameters are as follows:
Speed
This field sets the baud rate of the port and can
be set to the following values: 50, 110, 150,
300, 600, 1200, 1800, 2400, 4800, 9600,
19200, 38400, 57600, 115200. The default
setting is 9600.