Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 32 / 150

26
IO LAN +
- User and Administration Guide
** Administrator ** PORT SETUP MENU REMOTE-ADMIN
Hardware Flow ctrl Keys
Speed [9600 ] Flow ctrl [XON/XOFF] Hot [^]] Intr [^C]
Parity [None] Input Flow [Enabled ] Quit [^@] Kill [^U]
Bit [8] Output Flow [Enabled ] Del [^@] Sess [^@]
Stop [1 ] Echo [^@]
Break [Disabled] IP Addresses
Monitor DSR [No ] Src [ ] Mask [ ]
Monitor DCD [No ] Dst [ ]
User Options Access
Name [ ] Keepalive [No ] Access [Local ]
Terminal type [ansi ] Rlogin/Telnet [Telnet] Authentication [None ]
TERM [ ] Debug options [No ] Mode [Telnet]
Video pages [0] Map CR to CR LF [No ] Connection [Initiated]
CLI/Menu [Menu] Hex data [No ] Host [204.17.209.1 ]
Reset Term [No ] Secure [No ] Remote Port [23 ]
MOTD [No ] Local Port [10006]
________________________________________________________________________________
Figure 13: Port Setup Menu screen.
The following fields are important:
Access: Set this field to
Local. This tells the terminal
server port to listen for data on the RS-232 side.
Mode: With this field set to telnet, the port will operate
in telnet mode (or raw for rlogin). Most systems
will use telnet.
Connection: Set this field to
Initiated and the port will establish
a TCP/IP connection to a specified host only after
receiving a <CR> on the RS-232 port. If you set this
field to
none, then the user of this port will see the
menu system when the terminal is powered on.
Host: Use this field to define which host computer you
want the port to automatically connect to when
using
Initiated connections. Use the host’s IP
address or if you setup the Host Address Menu,
you can use a name (see next section).
Remote Port: This corresponds to Telnet service on the remote
host and must be set to the standard 23 (or 513
for rlogin).