CHART ULTRADOSER 500S, Руководство пользователя

Страница: 32 / 43

www.chartdosers.com PN 15920 Page 32 of 43
13. Use the arrow key
▲
or
▼
to go to the Dose Time screen (image below). Press ENTER to highlight the
value.
IMPORTANT: The Dose Time setting controls the amount of time (in milliseconds) that the UltraDoser
®
LN
2
Dosing System dispenses liquid nitrogen. The amount of liquid nitrogen inside a container depends on many
variables including the position of the dosing head relative to the capper, the size of the dosing nozzle, the
temperature of the container contents, fill levels and head space. Therefore, the time setting for each filling
operation must be evaluated.
14. Use the arrow key
▲
or
▼
to change the value. Press ENTER when the desired value is shown; range is
15 to 1000 milliseconds. The dose time is now set.
15. Use the arrow key
▲
or
▼
to go to the Continuous Dosing Line Speed screen (image below). Press
ENTER to highlight the value.
IMPORTANT: The Continuous Dosing Time Speed is the line speed at which the 500S controller will change
from discrete to continuous dosing. This is preset at the factory to 500 cont/min.