CHART ULTRADOSER 500S, Руководство пользователя

Страница: 23 / 43

www.chartdosers.com PN 15920 Page 23 of 43
5
5
0
0
0
0
S
S
C
C
o
o
n
n
t
t
r
r
o
o
l
l
l
l
e
e
r
r
A
A
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
s
s
The 500S controller dictates the dosing operation of the system. The controller allows the system to operate in
either a “Fixed Delay” or a “Speed Compensation” mode.
In Fixed Delay mode, the operator inputs the “Dose Time” and the “Fixed Speed Mode Delay”. When the
system detects a bottle (or container), the UltraDoser will dose per the dose time after the fixed speed mode
delay time passes. In this mode the system only requires a container sensor to detect bottles (or containers).
In Speed Compensation mode, the 500S controller automatically adjusts the time delay from the time the
UltraDoser
®
LN
2
Dosing System senses the bottle (or container) to when it doses based on the speed of the line.
The operator must enter several parameters and install a container sensor and a speed sensor (see page 19 for
additional information). The 500S controller will automatically change to continuous dosing at 500 containers
per minute (cont/min).
IMPORTANT: The default unit of measure for the 500S controller is metric. To change to imperial unit of
measure, the wire into IO.4 must be removed.
Home Screen
From the Home screen (image below), the operator can navigate to other screens and functions. The Home
screen shows current dose duration (in milliseconds) and filler line speed (in containers per minute).
IMPORTANT: The 500S controller defaults to the home screen at power up. After one (1) minute, other
screens will default back to the home screen.