Ceyear 3672 Series, Быстрый старт

Страница: 22 / 41

3672 Series Vector Network Analyzer
Contents
characteristics of each interface are as follows:

Port 1: Vcc, 4.75 V ~ 5.25 V, max. output current: 500 mA.

Port 2: Data-.

Port 3: Data+.

Port 4: Ground.
Fig. 2.16 USB Interface
7) Display screen
The screen display of the analyzer is as shown in the following figure. The screen display of the analyzer
is the TFT LCD, and the technical indicators are as follows:

FT 12.1 inch LCD

Resolution: 1,280 × 800

Vertical refresh rate: 60 Hz

Horizontal refresh rate: 48.4 kHz
Fig. 2.17 Display Screen of the Analyzer
8)
【
Power On/Standby
】
key and indicator lamp
The
【
Power On/Standby
】
key and indicator lamp are as shown in the following figure. The power
switch is used to power on the analyzer or keep it in a standby status.

The indicator lamp of the analyzer is green when it is powered on.

The indicator lamp of the analyzer is orange in case of standby.

When the analyzer is powered on, press down the power button, and the analyzer will
automatically run Windows 7 operating system and load the analyzer application measurement
program.

When the power button is pressed down in a standby status, the analyzer will automatically exit
the application and will be powered off to enter the standby status.