Ceyear 3672 Series, Быстрый старт

Страница: 16 / 41

3672 Series Vector Network Analyzer
Contents
Fig. 2.7 Use of Torque Wrench
2.2 Operating System Configuration
The 3672 series vector network analyzer has installed with Windows 7 operating system which has
been configured according to the functions and requirements of the instrument. The host software of this
instrument is based on Windows 7 operating system, and it has been installed before delivery. In order
to ensure the normal operation of software of the instrument, certain rules shall be observed when using
the operating system.
Third-party software may
affect the analyzer’s performance
The 3672 series vector network analyzer is equipped with open Windows environment, and installed
with other third-
party software, and it may affect the analyzer’s performance. Only software tested by the
manufacturer and compatible with the main unit software can be run.
2.2.1 System recovery
When the analyzer operating system works abnormally because the user improperly powers off the
analyzer, the analyzer infects with the virus or it is installed with other software, the system shall be
recovered to the factory default status. The system recovery steps are as follows:
1) Power off the analyzer, and connect the USB interface with the keyboard;
2) Press down
【
Power On/Standby
】
key in the left bottom corner of the front panel. When the
indicator lamp connected with the keyboard lights up and the page as shown in Fig. 2.8 appears,
immediately press down
【 ↑ 】
and
【 ↓ 】
keys on the keyboard to select System Recovery, and then
press down
【
Enter
】
key on the keyboard to automatically recover the instrument;
Fig. 2.8 Power-on Display
ATTENSION