CET PMC-512-D Скачать руководство пользователя страница 27

Страница: 27 / 66

CET Inc.

3.3.4 DI/DO Status

Menu

Sub-Menu

Measurements

DI/DO

Status

DI (1-13)

DIx (x=1 to 13)

Table 3-7 DI/DO Status Display Pages

3.3.5 SOE Log

The PMC-512-D supports the display of the SOE Log with its relevant parameter values and its
timestamp. The users can scroll through the SOE Log by pressing < > or < >.

Two examples of SOE Log Display:

Figure 3-3 Examples of Event Log Display

3.3.6 Information

Menu

Description

Parameters

Info

Meter Information

Firmware

Firmware Version

Modbus

Modbus Protocol Version

Ver. Date

Firmware Version Date

S/N

Serial Number

Diagnostics

A/D Diagnostics

FRAM

FRAM Diagnostics

FLASH

FLASH Diagnostics

Setup Param.

Setup Parameters Diagnostics

Table 3-8 Information Display Pages

3.4 Setup and Maintenance via the Front Panel (Optional with the future LCD Version)
3.4.1 Making Setup Changes

Entering the Password:



Press <

> to enter the

Main Menu



Press < > to advance to the

Setup

menu.



A correct password must be entered before changes are allowed. The factory default password
is “0000” (four zeros).



Press < > to shift the cursor to the left and < > to increment the numeric value for the
password.



When the password has been entered, pressing <

> will enter the

Setup

sub-menu if the

password is correct (otherwise, the device will respond “Incorrect Password”).

Selecting a parameter to change:



Press < > to scroll to the desired sub-menu or parameter.



Press <

> to select the sub-menu or parameter for configuration.



Hold <

> for 2 seconds to return to the previous menu level.



Repeat Step 2 until all the desired setup parameters have been selected.

Содержание PMC-512-D



































































Результаты поиска

Содержание PMC-512-D

Отзывы:

CET PMC-512-D, Руководство пользователя, Страница: 27 / 66

Результаты поиска

Содержание PMC-512-D

Отзывы: