Installation Guide for FibeAir IP-20S, FibeAir IP-20S Assured
Page 11 of 105
Ceragon Proprietary and Confidential
1.3
Pre
-
Installation Instructions
1.3.1
Packing
The equipment should be packed and sealed in moisture absorbing bags.
1.3.2
Transportation and Storage
The equipment cases are prepared for shipment by air, truck, railway and sea,
suitable for handling by forklift trucks and slings. The cargo must be kept dry
during transportation, in accordance with ETS 300 019-1-2, Class 2.3. For sea-
transport, deck-side shipment is not permitted. Carrier-owned cargo containers
should be used.
It is recommended that the equipment be transported to the installation site in its
original packing case.
If intermediate storage is required, the packed equipment must be stored in a dry
and cool environment, and out of direct sunlight, in accordance with ETS 300 019-
1-1, Class 1.2.
1.3.3
Unpacking
The equipment is packed in sealed plastic bags and moisture absorbing bags are
inserted. Any separate sensitive product, i.e. printed boards, are packed in anti-
static handling bags. The equipment is further packed in special designed cases.
Marking is done according to standard practice unless otherwise specified by
customers. The following details should be marked:
•
Customers address
•
Contract No
•
Site name (if known)
•
Case No
1.3.4
Inspection
Check the packing lists and ensure that correct parts numbers quantities of goods
have arrived. Inspect for any damage on the cases and equipment. Report any
damage or discrepancy to a Ceragon representative, by e-mail or fax.
