Centrometal BioTec Plus 25 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 130

Centrometal BioTec Plus 25 Скачать руководство пользователя страница 70

If you smell flue gas:

- shut down the heating system
- Ventilate the boiler room
- Close all doors leading to the living space

8.0. BOILER USE

Boiler must not be used in flammable and explosive environment.
It must not be used by children or disabled persons (either physically or mentally), as well as by
person without knowledge or experience, unless they are under control or trained by s person
responsible for their safety. Children must be supervised in the vicinity of the product. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard. Protective gloves are obligatory.
Check whether boiler and equipment are installed and connected in accordance with these Technical
instructions. Check whether chimney meets requirements of point 4.0 therein. Check whether boiler
room meets all requirements therein. Check if fuel fulfils all requirements therein. Check whether the
boiler and the entire heating system are filled with water and vented.

Note:

Before every use check if the boiler doors and cover door are closed.

Flue gas can lead to life-threating poisoning!

Boiler use

Technical instructions

BioTec Plus

70

«
...
68
69
70
71
72
...
»

Содержание BioTec Plus 25



































































































































Отзывы:

Нет отзывов