Centrometal BioTec Plus 25 Скачать руководство пользователя страница 104

Страница: 104 / 130

9.0. CLEANING AND MAINTENANCE OF THE BOILER

Every millimeter of soot and dirt on the surfaces of the boiler surface means approx. 5% higher
fuel consumption.

Save fuel

–

lean the boiler

time!

PROTECTIVE GLOVES ARE OBLIGATORY!

DESCRIPTION OF MAINTENANCE

INTERVAL

Cleaning ash in firebox and under firebox (through
middle and lower door - left part of the boiler) and ash tray
emptying from right part of the boiler.

Before each ignition.

Flue gas tube cleaning.

Before refilling of fuel / before ignition.

Checking correctness of security valve.

Every 6 months.

Cleaning of flue gas chamber.

At least once per year.

Cleaning and checking the flue installation sealing.

At least once per year.

Cleaning of area over heat exchanger pipes with
turbulators.

Cleaning the blades and box of the fan.

At least once per year.

Photocell cleaning.

At least once per year.

Cleaning and maintenance of the boiler

9.1. PERIODIC CLEANING AND MAINTENANCE OF THE BOILER

NOTE

For any electrical connections, be sure to turn off the boiler
at the main switch and disconnect the power supply cable.

Technical instructions

BioTec Plus

104

Содержание BioTec Plus 25



































































































































Результаты поиска

Содержание BioTec Plus 25

Отзывы:

Centrometal BioTec Plus 25, Технические инструкции, Страница: 104 / 130

Результаты поиска

Содержание BioTec Plus 25

Отзывы: