CE+T Power Sierra 10 - 48/230, Руководство пользователя

Страница: 64 / 67

ID Name Description Min Default Max Unit
CF1002 Low Stop
Low DC voltage where a lower value stops the
DC/AC converter.
39 39 61 V
CF1003 High Start
High DC voltage where a higher value re-starts
the DC/AC converter.
39 58 61 V
CF1004 High Transfer
High DC Voltage where a higher value leads to
transfer the load from DC IN to AC IN.
39 61 61 V
CF1005 High Stop
High DC voltage where a higher value stops the
DC IN converter. Value increased from sw 173 to
62 VDC.
39 61 61 V
CF1066 Charging Voltage DC voltage set point in SIERRA mode. 53 54 54 V
CF1067 Discharging Power
DC power setpoint in sierra mode (> 0 if battery
discharge, <0 if battery charging).
0 - 800 W
Converters Configuration
CF1034
Short circuit
threshold voltage Minimum Voltage Threshold where converter
considers that outlet is in short circuit.
10 80 100 V
CF1035
Short circuit hold
time
Time Duration when a converter tries to
eliminate the short-circuit existing on outlet. If
the system is still in short-circuit after this time,
the output will be stopped.
1 10 600 s
CF1036
Input source in
Percent
Defines the priority source
0 - Feeding from AC IN has priority
(converter AC/AC - EPC mode) default value.
100
- Feeding from DC has priority
(converter DC/AC - On Line mode)
0 0 100 %
CF1037
Synchronization
tracking speed
The speed at which the converter tries to
synchronize the AC Out with AC IN. The lowest
value will have the fastest synchronization.
-2 0 2 -
CF1038
Max current
Percent
Maximum Power that converter can supply. 30 150 150 %
CF1039 Max power Percent Maximum Current that converter can supply. 30 150 150 %
CF1040
Max Overload
Duration Maximum Time Duration when converter can run
with overload.
15 15 15 s
CF1041 AC in mode
Allows to open the AC IN inlet relay
0 - normal running in EPC mode
1 - AC IN inlet relay is open and so the system is
insulated from the Mains.
This parameter can be set to
1 only if repartition
is on DC (parameter 036 should be 100)
0 0 1 -
CF1042 Booster 10x I in
Allow to inhibit the Booster option which
generates a current of 10 In for 20ms in case of
short-circuit (9 In for Nova converter).
0 0 0 -
64 – Sierra 10 - 48/120 VAC – User Manual – v1.1
Appendix