background image

7.5.1  Login

Once system is powered on, the Inview Slot/S and X is up and ready for 
operation. Configuration and other parameters can be changed using the 
web interface. Perform the following procedure to configure the system 
through web interface.

Open the web browser and type the default IP address 

10.250.250.1  

in the address field and press enter.

Note: Use any one of the following latest web browsers: Google Chrome, 
Mozilla Firefox, Safari, or Microsoft Edge.

Inview Slot, S and X have three login – Basic, Expert and Admin. All three 
login is password protected.

The default password for all three logins is “1234”.

Basic login can only browse the pages and download the files, but 

Expert

 and 

Admin

 login can access and also modify 

the system parameter values.

An auto-logout feature is available to avoid a user being connected all the time. When no action is performed for more 
than 

10 minutes

, the session will expire and goes to login screen.

7.5.2  Interface Areas

 Header

  Main Page

1

2

37 

– Sierra 10 - 48/120 VAC – User Manual – v1.1

Interface

Содержание Sierra 10 - 48/230




































































Отзывы: