CE+T Power Sierra 10 - 48/230 Скачать руководство пользователя страница 20

Страница: 20 / 67

6.2 Mounting kit for Sierra 10 shelf

Sierra 10 shelf mounting kit is designed to fix in different depth cabinets. The part number is

T319000001

and has the

following accessories in the kit.

4 x Fixing brackets

2 x Sliders

8 x (M5 Philips head screws and nuts)

2 x (M6 Hex socket screws, cage nuts and nuts)

6 x (M6 Philips head screws and cage nuts)

Perform the following steps to install the shelf mounting kit in the cabinet:

1. Adjust the slider and brackets depending upon the cabinet depth, and fix it with M5 screws and nuts. If holes are

available in the kit, fix it with the additional screws and nuts to increase the kit strength.

2. Place the assembled mounting kit in the cabinet and fix it on the front side at any one hole with the M6 Hex

socket screw and cage nut.

(Note: Tighten the Hex socket screw with Allen key till it touches behind the metal

part.)

3. Fix the other end of the mounting kit at cabinet rear using the M6 Philips head screw and cage nut.

4. Similarly, assemble another mounting kit and fix it on another side of the cabinet.

Adjust the slider and brackets

Fix it with screws and nuts

Fix the assembled kit in the cabinet

Screw, mounting kit & cage nut arrangement

Mounting kit

Cage nut

Hex socket

Screw

Cabinet frame

Tighten the screw till it touches the metal part

5. Place the shelf on the mounting kit and fix it with a M6 nut in the already installed hex socket screw used for the

mounting kit.

6. Fix the other hole of the shelf in the cabinet using M6 Philips head screw and cage nut.

7. Similarly, fix the other side of the shelf and insert modules in the corresponding slot.

Place the shelf in the cabinet and fix it

Insert the modules in the shelf

Philips head screw

Hex socket screw

Nut

– Sierra 10 - 48/120 VAC – User Manual – v1.1

System Installation

Содержание Sierra 10 - 48/230




































































Результаты поиска

Содержание Sierra 10 - 48/230

Отзывы:

Бренды по названию

Популярные бренды

CE+T Power Sierra 10 - 48/230, Руководство пользователя

Результаты поиска

Содержание Sierra 10 - 48/230

Отзывы:

Бренды по названию

Популярные бренды