CD Automation Revo M 2PH, Руководство пользователя

Страница: 19 / 45

CD Automation srl REVO M User’s Manual
CD-Eng-REVO-M-2PH-30-40A-Thyristors-Units
19
11.2 Command Terminals
Warning: Before connecting or disconnecting the unit check that power and control cables
are isolated from voltage sources.
11.2.1 Terminal block M2
Terminal Description
1 GND
2 COM I - Common Digital Input
3 DI 2 – Enable Digital Input
4
DI 1 - Configurable Input
5 + Control Input (SSR/0-10Vdc/4-20mA)
6 - Control Input (SSR/0-10Vdc/4-20mA)
7 +10V Output
8 Slave Output - (factory connection)
9 Slave (factory connection)
11.2.2 Terminal block M1
Terminal Description
10 GND
11 TA1 Input (factory connection)
12 TA1 or TA2 input (factory connection)
13 TA3 input (factory connection)
14 C - Common contact alarm relay output
15 NO - Normally Open contact alarm relay output (HB)
16 NC - Normally Close contact alarm relay output (HB)
11.2.3 Terminal block M3
Terminal Description
A+ RS485 A
B- RS485 B
11.2.4 Terminal block M4
Terminal Description
L1
Aux – Voltage Supply for elettronic boards and syncronizzation (
See order code for the Value)
- Not Connected
L2/N
Aux – Voltage Supply for elettronic boards and syncronizzation (
See order code for the Value)