CCS LSS-2404, Руководство пользователя

Страница: 32 / 64

LSS-2404
28 | P a g e
GUI Settings
Clear (32)
Pressing ‘Clear’ removes all check boxes in the channel mapping and allows the user to set a new sequence from
scratch.
Log and Titles (33)
IP – LSS static IP address
Name – LSS device name
Product – LSS product name and firmware version number
PCB – LSS PCB info number consisting of 3 parts
ID: Identifies which type of LSS (01=LSS2404, 02=reserved for future model)
REV: LSS PCB revision
MOD: Modification Number
ID – Unique processor identification number
Recipe Version – Recipe version supported by the GUI. If a different recipe version is loaded from a file, it will
cause an error displayed in a pop-up window.
Temperature – Shows the temperature (in Celsius) the LSS is operating at
Log – Shows the changes that have been made to the LSS for debugging purposes
Auto Log Size Limit
Automatically checked; sets the maximum size the log can be before clearing. Uncheck if you need to manually
control the size of the log.
Summary
A table of the default values is below. Note : clicking ‘Test Defaults’ sets the Active settings to these values.
Variable Default
Trigger Type One-Shot
Trigger Level 9.6 V
Ground Trigger unchecked
Executions 1
Frame Time 25 mS
Frame Rate 40 fps
Camera Trigger Width 15 mS
Camera Trigger Voltage 24 V
Strobe Width
20 mS
Independent Widths Unchecked
Number of Frames 4
Channels
Frame 1; Channel 1
Frame 2; Channel 2
Frame 3; Channel 3
Frame 4; Channel 4