Carrier 30RBM 160, Инструкции по установке, эксплуатации и обслуживанию

Страница: 22 / 76

22
For the high-pressure single and dual-pump motors of 30RBM/RBP 160-520 units (options 116R, 116S, 116V, 116W)
No.
(2)
Description
(3)
Units
30RBM/30RBP
160 180 200 220 260 300 330 360 400 430 470 520
1 Nominal efficiency at full load and nominal voltage % 87,5 87,5 87,5 87,5 89,9 89,9 89 89 89 89,6 89,6 89,6
1 Nominal efficiency at 75% of full load and nominal voltage % 88,2 88,2 88,2 88,2 90,4 90,4 90 90 90 90,8 90,8 90,8
1 Nominal efficiency at 50% of full load and nominal voltage % 87,5 87,5 87,5 87,5 89,6 89,6 89,7 89,7 89,7 90,8 90,8 90,8
2 Efficiency level - IE3
3 Year of manufacture - This information varies depending on the manufacturer and model at the time of
incorporation. Please refer to the motor nameplates.
4 Manufacturer's name and trademark, commercial registration
number and manufacturer's head office
- Same as above
5 Product's model number - Same as above
6 Number of motor poles - 2 2 2 2 2 2 2 2 2 2 2 2
7-1 Nominal shaft power output at full load and nominal voltage (400 V) kW 3 3 3 3 4 4 5,5 5,5 5,5 7,5 7,5 7,5
7-2 Maximum input power (400 V)
(4)
kW 3,81 3,81 3,81 3,81 4,96 4,96 6,80 6,80 6,80 9,16 9,16 9,16
8 Rated input frequency Hz 50 50 50 50 50 50 50 50 50 50 50 50
9-1 Nominal voltage V 3 X 400
9-2 Maximum current drawn (400 V)
(5)
A 6,81 6,81 6,81 6,81 8,27 8,27 11,30 11,30 11,30 15,30 15,30 15,30
10 Nominal speed rps - rpm 48 - 2900
11 Product disassembly, recycling or disposal at end of life - Disassembly using standard tools. Disposal and recycling using an appropriate
company.
12 Operating conditions for which the motor is specifically designed
I- Altitudes above sea level
m < 1000
(6)
II - Ambient air temperature °C < 40
III - Maximum operating temperature °C Please refer to the operating conditions given in this manual or
in the specific conditions given in the Carrier selection programs.
V - Potentially explosive atmospheres - Non ATEX environment
(1) Required by regulation No. 640/2009 concerning the application of directive 2009/125/EC on the eco-design requirements for electric motors.
(2) Item number imposed by regulation No. 640/2009, annex I2b.
(3) Description given by regulation No. 640/2009, annex I2b.
(4) To obtain the maximum input power for a unit with hydraulic module, add the maximum unit input power from the electrical data table to the pump power input.
(5) To obtain the maximum operating current draw for a unit with hydraulic module, add the maximum unit current draw from the electrical data table to the pump current draw.
(6) Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.
5.7 - Electrical data notes for the compressors
Cp I Nom
I Max
Un
I Max
Un-10 %
LRA
Un
Cosinus
Phi Max
00PSG001961100A 30 41 44 215 0,89
00PSG001748000A 37 50 54 260 0,89
Cp Compressor
I Nom Nominal current draw (A) at standardised Eurovent equivalent conditions (see definition of conditions under nominal unit current draw)
I Max Maximum operating current (A)
LRA Locked rotor current (A)
Cos phi Max @I Max
5.8 - Distribution of compressors per circuit
Cp Circuit 160 180 200 220 260 300 330 360 400 430 470 520
00PSG001961100A A 1 - - 2 - - - 3 - 3 - -
B 2 2 - 2 - 3 - - - - - -
00PSG001748000A A - 1 1 - 2 2 2 - 3 - 3 4
B - - 2 - 2 - 3 3 3 4 4 4
Cp Compressor
I Nom Nominal current draw (A) at standardised Eurovent equivalent conditions (see definition of conditions under nominal unit current draw)
I Max Maximum operating current (A)
LRA Locked rotor current (A)
Cos phi Max @I Max