CARLO GAVAZZI VMU-C EM, Инструкция по эксплуатации

Страница: 62 / 126

VMU-C
VMU-C Instruction manual 62
3.4 VMU-O MODULE OUTPUT MANUAL
COMMAND CONFIGURATION
Pressing the “NEXT” button again will grant access to the screen allowing to configure
the manual commands of the relay outputs on the VMU-O modules .
Through this function, by using a manual command, you'll be able to remotely activate or
deactivate (via Ethernet/through the Internet) the digital outputs of the VMU-O modules
installed on-field.
Note : To be able to use this function, the outputs on the VMU-O modules must be set to
REMOTE control.
Note : you can create up to 20 manual commands.
VMU-O output manual command configuration mask

In the
“
Description
” column you can associate each command with a label
identifying the function the command in question will activate (for example
“Outdoor lighting switch-on”).

The
“
Base
module”
column allows to associate the descriptive label (see the
above paragraph) with the digital output defined for the purpose. Opening the
drop-down menu will display the list of all the outputs previously set to REMOTE
command .