CARLO GAVAZZI VMU-C EM, Инструкция по эксплуатации

Страница: 40 / 126

VMU-C
VMU-C Instruction manual 40
Download
Enabled if CHECK is successful; it starts
the
package download from Carlo
Gavazzi’s servers; at the end of the
download step it is possible both to start
installation and also to check again (the
latter chance is useful in the case the
download has not been followed by Install
and time has passed by
Install Enabled if DOWNLOAD is successfully
finalized; it starts the package installation
Note: the time necessary to the system for loading the update depends on the speed of
the Internet/LAN connection between the PC and VMU-C and could last for several
minutes, particularly in connection with cellular modem. Wait for the report to confirm
the successful download.
Notes: Major updates introducing brand new important features need time to be
finalized.
3.1.11.3 FIRMWARE UPDATE – SERVER SETTINGS
After having been officially authorized by Carlo Gavazzi, an user could setup a firmware
update server in its own IT infrastructure. This is useful in the case of complex
organizations needing to apply special firmware deployment policies.
In this case it is possible to configure an alternate server, under the user responsibility, to
be accessed as the VMU-C firmware repository.
Firmware Update
–custom FTP server
By the relevant fields it is possible to configure the client so as to communicate with the
FTP server :

FTP server address: IP or Internet address of the target FTP server

Remote directory: directory where the firmware packages are stored within the
FTP server

Server user: user name to access the above directory

Server password: password to access the above directory
Note: setting up a custom FTP repository needs special training on the relevant
procedures to allow firmware package deployment. Please contact Carlo Gavazzi
Support for further information.