CARLO GAVAZZI VMU-C EM, Инструкция по эксплуатации

Страница: 21 / 126

VMU-C
VMU-C Instruction manual 21
3.1.4.1 DP SERVICE SETTINGS
By selecting the Setting submenu it is possible to access the DP Service configuration
page.
DP Service configuration
The parameters to set to successfully join the Em
2
-Server /VMU-Y are:
Parameter Description
Server Address It is the internet address of the Em
2
-Server / VMU-Y
GPS coordinates The GPS coordinates of the VMU-C; they may be set
manually or by using the Map on the bottom
Upload time interval It is the time interval between two distinct data upload
transactions from VMU-C to Em
2
-Server /VMU-Y
It depends on available bandwidth (on both sides),
amount of data to push, Internet congestion.
Typically “10 minutes” is a good compromise
Command Processing
interval
It is the time interval between two distinct request-for-
commands transactions from VMU-C to Em
2
-Server
/VMU-Y; VMU-C asks Em
2
-Server / VMU-Y for commands
at scheduled intervals and processes them accordingly.
Typically it is equal to “Upload time interval”
The available commands are:
Command Description
Test Connection It allows to check if the configured parameters are good,
and it is possible to establish a connection between VMU-
C and Em
2
-Server /VMU-Y
Send It allows to send from VMU-C to Em
2
-Server /VMU-Y:

Full configuration (after having finalized the VMU-
C’s configuration)

Partial configuration (after having updated the