CARLO GAVAZZI VMU-C EM, Инструкция по эксплуатации

Страница: 120 / 126

VMU-C
VMU-C Instruction manual 120
13
DATA BACK-UP

Data back-up on external memory (optional)
Using a “Micro SD” or “SDHC” memory card appropriately inserted in the relevant
slot or a PenDrive directly connected to the USB port , you can back up the data
existing in the VMU-C EM database.
Note: the Micro SD card is not supplied with VMU-C.
VMU-C supports Micro SD or PenDrive cards whose capacity doesn't
exceed 16GB.

Micro SD installation
1. Open the flap located on the front section of VMU-C EM. Identify the
slot specifically designed for the insertion of the “Micro SD” memory
Slot for Micro SD cards
2. Insert the Micro SD card, making sure it is not write-protected and it is
properly formatted (FAT32).
3. Close the flap back. Warning: if the flap is not properly closed VMU-C
EM will not enable any writing or reading operation (flap closing is
controlled by a micro switch located under the flap).
4. As soon as the flap is closed, VMU-C EM will install the newly inserted
memory card and transfer the BACK-UP data. As long as the
installation and writing operations are unde
r way, the front “ON” LED
(green) will blink. Warning: opening the flap during the writing stage will
stop the data transfer process and might damage the Micro SD
memory.